Growing mold and mildew in sealant are very natural. In the case of silicone, this is nothing different. Silicone sealant is mainly used in dry areas, such as windows, door trims, frames, types of cement, or many other dry places.
How to remove black mould from silicone sealant naturally?
Silicone is a waterproof sealant, so a user should remember that visible mould sealant should not be used in wet areas, possibly.
But keeping windows and doors away from water all the time is not easy. Because of rain and unwanted moisture, these areas can get flooded.
As the cause of moisture, mold, and mildew can grow at the edge of the window, door, or concrete area. Among all the mold variants, black mold is the most well-known.
Black mold makes your interior area ugly and unhealthy. So whenever you see them growing, removing them is the best solution. Using white vinegar, soda, Borax hot water, and detergent are the common elements.
In this article, we will focus on the black mold’s cleaning process, and we will know how to prevent it from growing in a silicone shower sealant.
Characteristics of Silicone Sealant
Silicone sealant is a kind of liquid glue. The majority of the time, it comes up as gel. It is a mixture of different chemical formulas than organic polymer-based glues.
Silicone is flexible and durable at every temperature. Moreover, silicone finishing tool does not react with other chemicals or weather changes as well.
Drying silicone is not very difficult to peel, but it does take a lot of time. For silicone to become hardened, the temperature range must be 40 to 100 degrees Fahrenheit, and the humidity level should be between 5 and 95%. When the sealant becomes thick, the curing process might take more than 24 hours.
What Is Black Mold and How Does It Form?
Most molds are green or gray, but toxic black mold looks dark or greenish-black. Black mold also smells stinky and musty, which is another way to spot it easily.
Black mold can grow in hot, humid, and wet places. It can also grow on wood, toilet paper, and dusty surfaces.
How to Remove Black Mold from Silicone Sealant – Top Class Solutions
There are numerous ways of cleaning mold, and here we have discussed the most common and inexpensive solutions:
Solution 1: Try Vinegar
White vinegar is a good solution to get rid of black mold, and it is an environmentally friendly and cost-effective way to do it.
The antibacterial and acidic characteristics will give you what you are looking for. To remove black mold from any surface, pour the white vinegar straight into the mold patches, or you can use a spray bottle to apply the vinegar to the moldy area.
Alternatively, use a disposable paper towel to wipe away the mold from the area. If it doesn’t work, try brushing to remove spots. After applying all these processes, allow it to dry, and thoroughly wipe the area with a wet cloth.
Solution 2: Applying Baking Soda
When cleansing black mold, baking soda is one of the most effective substances available. To apply, mix baking soda and water in a 50/50 ratio to create a paste. This mixture usually removes major mold stains and prevents their regrowth.
To get a sustainable solution, remove black mold spots with a little brush. Then, add two teaspoons of baking soda to 2 cups of water in a spray bottle, shake well, and use as required. To prevent additional mold growth, spray the mixture two to three times.
Solution 3: Doing Bleach
Before applying bleach, make sure the space is well-ventilated before you begin using bleach. Don’t forget to put on gloves to keep your hands safe. One cup of bleach with one gallon of water is the ideal bleaching ratio for cleaning black mold.
When applying the solution to different surfaces where black mold grows, you may use a spray bottle, sponge, or cloth to clean. However, if you use the surface for food preparation or your home has young children or pets, do not use bleach.
Solution 4: Using Borax
Regarding pH and toxicity, the white mineral powder known as borax has a value of around 9. Therefore, borax is a popular choice as a black mold remover and drains cleaner.
When it comes to cleaning black mold, borax has several benefits, aside from the fact that it is best for mold cleaning. Moreover, borax is a natural cleaning solution that does not produce chemicals or harmful fumes like any other mold-killing product.
Use 1 cup of borax per gallon of water, and use that borax-water solution to destroy mold. Use a HEPA-filtered vacuum cleaner to reduce the number of mold spores released into the air during the cleaning process.
Therefore, use a scrubbing brush and the borax-water solution to remove the mold. Again, remove any remaining moisture, mold, or dust. Use a clean, dry cloth when the surface becomes dry.
As long as the borax solution remains on the surface, no more mold will be able to form. Therefore, allow the surface to dry fully before using it again.
Solution 5: Utilizing Hot Water and Detergent
A mix of detergent and warm water is able to remove black mold from any hard surfaces by scrubbing them with the mixture.
If you wipe off all the mold growth that has grown on a substance mould growth that does not have lingering mould spores pores, then you do not need to use detergent to kill the mold.
How to Prevent the Problem of Black Mold
Taking a few preventative steps can keep your home black mold-free. Here are some
- Minimize the amount of moisture in your house. In such a case, you should use dehumidifiers and fans. Keep your windows open to pass the air. Always use extra caution when temperatures and humidity levels become high.
- Fix plumbing leaks as quickly as possible
- Stopping rainwater from leaking into your house can prevent black mold mould growth. Find out leakage area unsightly mould resistant and repair them
- Maintain a consistent cleaning schedule for the surface and narrow areas of your home.
- Keep home dry and well-ventilated
Here we have just tried our best to give a common solution for eliminating black mold in a silicone sealant area. Hopefully, these solutions will help you a lot. If not, then you can contact a home expert.
Hello! this is John Cox. If I’m not wrong, you love Home. Right? And you already met one of them who’ve been in this field since 2005 and still go on. According to my interest, I’ve started this blog to share my thoughts about Home sectors, and you’ll love it.